Horizontal Drilling Companies Dubai : List of the Horizontal Drilling Companies with Contact Details & Location Map. Top Horizontal Drilling Companies in Dubai.
Horizontal Drilling Companies Dubai : List of the Horizontal Drilling Companies with Contact Details & Location Map. Top Horizontal Drilling Companies in Dubai.

Horizontal Drilling Dubai

Horizontal Drilling Dubai : List of Horizontal Drilling Companies in Dubai with Contact Details

Horizontal Drilling Companies Dubai : List of horizontal drilling companies in Dubai with contact details including company names, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings.

Horizontal Drilling Companies in Dubai UAE – : Every boring contractor’s objective is to be profitable. To achieve this goal, the project must be efficient and must be completed within an acceptable time frame. These objectives require proper planning, skill and experience on the part of those in charge and of those on the project who operate the machinery and a variety of other tools. From a contractor’s point of view, there can be little benefit in any failures of equipment or tooling. Disclosed industry tooling failures do lead, however, to the discovery of alternative procedures for achieving future drilling success.

Tooling failures are often the result of unusual or complex conditions which arise from unknown hazards — hazards that do not occur in directional drilling. Other failures are frequently the result of practices in the production process. Experience, for which there is no substitute, is key in directional drilling. As with other professional endeavors, expert drill use depends on knowledge and skill, which is developed over time. Mud motors in high PSI applications are important in horizontal drilling. The following are five suggestions in production processes for maintaining efficiency in the use of mud motors in the directional drilling process of resource extraction.

First, avoid stalling the motor, as a motor stall usually indicates that the fluid flow has stopped motor rotation. This can be the result of increased thrust while in contact with the rock or cutting face, preventing motor rotation. This type of motor stalling forces fluid through the rotor and stator assembly without any rotation, which in turn leads to damage of both the motor and the pump.

Second, minimize abrasives in the fluid as much as possible by keeping all screens clean and in good condition. Effectiveness is a function of tolerance between motors and other equipment like the stator. All abrasives in this process are moving at high pressure through the motor, causing wear, reducing torque and, ultimately, overall productivity.

Third, be prudent by performing maintenance on a weekly basis or at around 100 hours of use, for the simple reason that moving parts in motors wear out. Sometimes it may seem that budget or production timetables demand foregoing scheduled maintenance. Remember, though, that horizontal directional drilling equipment usually breaks at the wrong time and repairs can be very costly. Most breakdowns can be prevented with methodical maintenance; it rarely pays, in the long run, to skip it. Productivity depends on teamwork and on the collective operation of men and the equipment they use. In drilling, and especially in horizontal and directional drilling, this includes a myriad of parts: bearings, rotor, stator, etc. Usually, if maintenance is not performed weekly or after only a hundred hours or so, the equipment’s full effectiveness will diminish and costs of service will rise. If the machinery malfunctions or breaks as a result of insufficient maintenance, the cost will be even greater.

Fourth, remember that projects may appear profitable when worked out on paper, but that profitability on a busy highway or other potentially dangerous work site is another matter. When a hazardous project is already over budget and past its completion time, with others waiting impatiently for the job to be finished, profits can drop or evaporate altogether. There are instances in which tooling has justifiably been sacrificed to finish the bore, just to get the project done. These are not situations, however, that anyone finds satisfactory or profitable in the end.

There are many cases in which effective practices actually increase the crew’s productivity and lower expenses in completion, while reducing tooling costs of the total holes drilled. These are the processes that incorporate the previous suggestions for proven success in running directional drilling over the long haul.

List of Horizontal Drilling Companies Dubai

Horizontal Drilling Companies Dubai : List of the Horizontal Drilling Companies in Dubai with contact details including company names, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings. Top Horizontal Drilling Companies in Dubai UAE.

1. Cross Road Drilling

Cross Road Drilling L.L.C. is a U.A.E based contractor, specializing in HDD (Horizontal Directional Drilling), NDRC (Non-Disruptive Road Crossings), NDM (Non-Disruptive Methods). HDD (Horizontal Directional Drilling) machine transported to work site to install pipe underground for road crossing. Cross Road Drilling L.L.C. is a U.A.E based contractor, specializing in: HDD (Horizontal Directional Drilling), NDRC (Non-Disruptive Road Crossings) and NDM (Non-Disruptive Methods). We provide reliable underground installations of pipes and conduits for a wide variety of services, utilities and cables. Properly performed, this method of Trenchless Technology has zero settlement to the ground surface, since there is no excavation… instead, displacement is used rather than excavation. Our installations are fast, clean and quiet with most by-passing people not even realizing we are working.

Cross Road Drilling
Dubai, United Arab Emirates
Tel: (04) 22 43 860
Fax: (04) 22 43 861

2. Adgeco Group

Horizontal Directional Drilling Services in UAE by Adgeco Group – Adgeco is capable every kind of Horizontal Directional Drilling like underground pipes, ditchwich HDD, aerial and underground fiber optic, concrete coating. Horizontal directional drilling also referred to as Directional Boring is a trench-less method of installing piping and cable systems underground in a shallow arc along a predetermined path by the use of highly specialized drilling equipment. It is a way to get utilities from one point to another without destroying the existing ground or obstacles that are in between the two points. HDD is best suited to applications where traditional trenching or excavating is either not practical or otherwise impossible such as getting services under roads, waterways, drains and areas already carpeted (covered with grass).

Adgeco Group offers Horizontal Directional Drilling with highly trained person in the Horizontal Directional Drilling field. Installation of underground pipes and cables including road crossings, installation of high voltage power cables, provision of holes for water pipeline, ditchwich HDD, aerial and underground fiber optic, aerial enclosure, cable splicing and termination, trenching, concrete coating. We provide complete services for Horizontal Directional Drilling such as provision of “Setting Out”, verification of underground utilities, excavation of trial pits and submission of trial pit reports, preparation, submission and approval of drilling profile, excavation of entry & exit pits including provision of safety measures, pilot drilling, back reaming and pipe pulling, sealing of both ends of product pipe and joint measurement of completed crossing.

Horizontal Directional Drilling eliminates ecological disturbance and contamination. Also, noise pollution is isolated to the location of the drill which is far away from homes and businesses. Horizontal directional drilling also minimizes cost of surface restoration as only to excavations are required, the entry and exit points of the drill stem.

In many cases, Horizontal Directional Drilling is use in combination with the traditional drilling (open cut) as the two complement each other. The directional drilling staffs take care of under roads, sidewalks or existing land that does not need to be disturbed. They also provide utilities underground in areas that are hard or impossible to plow on while the trenching staffs take care of the main runs on more level ground.

Adgeco Group
Three Sails Tower, 1204 Suite, 1-56 Al Hatl Street, Corniche Road P.O.Box 549, Building Number : 27w10 Abu Dhabi, UAE
Phone: + (971) 2-681-3111

3. Hydrotech Engineering NDRC

Hydrotech Engineering NDRC – Directional Drilling and Thurst Boring. Hydrotech Engineering began its NDRC operation in 1986. The Company specializes in non-disruptive road crossings utilizing the latest technology in Horizontal Thrust Boring and Directional Drilling Techniques. The latest advanced technology in horizontal directional drilling. Ideal for water, Gas, electric & fibre optic cables and telephone cables of single or multiple ducts. Drilling HDPE pipes from 32mm diameter to 1000mm diameter, and lengths from 8m to 500m, Under Roads, Railway tracks, Pavements, Lakes and rivers, Airport run ways, and solid structures.

Hydrotech Engineering NDRC
Dubai, United Arab Emirates
Tel.: +971-04 – 2599907
Fax:+971-04 – 2599908
P.O.Box : 20441

4. Al Naboodah Construction Group LLC

Al Naboodah Construction Group’s fleet of modern trenchless solutions (micro-tunnelling and directional drilling equipment) is one of the most extensive in the Middle East and is capable of driving tunnels up to 3.6 m in diameter, and drilling for sleeves up to 1.2 m in diameter. To date, over 78 km of utility crossings under runways, taxiways, highways and the seabed have been installed using these specialist techniques.

On The Palm Jumeirah, two sub-sea service tunnels both three metres in diameter and 750 m long were designed and constructed for carrying high-voltage cables, together with the drilling and installation of multiple service crossings using large diameter, heavy-duty sleeves.

Al Naboodah Construction Group LLC
P.O. Box 33900, Al Awir 800, Dubai – Hatta Road, E44, Dubai, UAE
Tel +971 4 294 8777
Fax +971 4 294 8833
Makani Number: 50314 83359

5. Fast Boring

Our company Fast Boring Service Line Coring & Ditching Contracting is one of the companies in Horizontal Directional Drilling. We have ongoing projects in Dubai, Abu Dhabi & Al Ain for DEWA and other pipe laying services. Our drilling team has experts in drilling; we have 2 set of Vermeer Boring Machines & equipment by German and American Experts. Extensive experience and knowledge makes our staff leading in boring and drilling throughout UAE. We are laying HDPE pipe from 75mm to 600mm under all kinds of road by Horizontal Drilling Method. At present we have the latest Vermeer Directional Drilling machine and latest accessories. With our Expert Employees we will be able to meet a successful requirement of all our clients.

Fast Boring Service Line Coring & Ditching Contracting
12th Floor, 1201
Yes Business Centre
Al Barsha 1 Dubai UAE
Po Box 392293
Tel : 04-4267084
Fax: 04-4267084


We would like to introduce our concern FLORA BORING L.L.C we are one of the leading company in Directional Drilling, Thrust Boring, Dewatering and Underground duct laying & associated works since 1996. We have been regularly undertaking project in Directional Drilling, Thrust Boring, Dewatering and Underground duct laying works all over the United Arab Emirates. We had been completed major jobs for Etisalat, Abu Dhabi and Dubai Electricity & Water Authority, Sharjah, Dubai & Ajman Municipality.

Flora Boring now extends its service in dealing with “Directional Drilling” works by modern types and technologies, capable to work in rock areas even though if it is in hard rocks and the sand areas and under water. The innovative process for laying pipes (Steel and HDPE) and cables with well qualified personals who can assist in finding solution for any type of boring works with the most suitable Drilling machines along with a number of major advantages like Trench less, Ecological, Economical, safe and fast ways to obtain the best results.

Post Box No. 47787
Dubai, United Arab Emirates
Tel. 04-2735283 – Dubai
Fax. 04-2713734 – Dubai
E-mail : florallc@emirates.net.ae
E-mail : mail@floraboring.com
E-mail : info@floraboring.com

7. Amtaar General Contracting

Horizontal Directional Drilling is a non-destructive surface-launched digging method which allows installation of underground pipe, conduit, or cable with minimal disturbance to the surrounding area. Amtaar General Contracting is regarded as one of the UAE leaders in Horizontal Directional Drilling (HDD) across a range of projects large and small.

Horizontal directional drilling, sometimes called directional boring or HDD, is a method of installing underground pipes and conduits along a prescribed bore path from the surface, with minimal impact to the surrounding area. The horizontal directional drilling process is used for installing telecommunications & power cable conduits, water lines, sewer lines, gas lines, oil lines, product pipelines and environmental remediation casings.

Horizontal Directional Drilling – The process begins when a directional bore machine pushes a bore head connected to hollow pipe into the ground at an angle. As each joint of drill pipe is pushed into the ground a new one is added behind.

Directional Boring Machines – Directional bore machines are rated by thrust and pullback force and rotary pressure. Sizes range from small machines with a few thousands pounds of thrust and pullback to the largest with over a million pounds of pullback force. Rotation is measured in pressure. Most machines are track or trailer mounted with a few smaller machines designed to be used in pits.

Amtaar General Contracting
Building 5, Mussafah M2, Abu Dhabi, UAE
PO BOX 128139
Tel: +971-2-5536811
Fax: +971-2-5536812
Email: info@amtargc.com

8. Dynomax Middle East LLC

Dynomax is a supplier of leading performance drilling products engineered for the oil and gas industry. We provide high value products and services for vertical, directional and horizontal drilling operations worldwide. Our product lines include Mud Motors, Shock Tools, Drilling Jars and Slide Reamers, which bear our industry-leading technologies backed by experience in the field—tools that are built for extended uses. We’ve maintained a reliable reputation for delivering tough tools with versatility, and service that’s well above standard. Our QA/QC Program ensures that every tool that makes it to the field meets or exceeds expectations on the field.

Dynomax Middle East LLC
P.O. Box 333347
Dubai, United Arab Emirates
Tel: +97148847550
Fax: +97148847551

9. NSCC International Dubai LLC

Address: Office # 513-516, 5th Floor, Building # 4, Al Nasr Plaza, Oud Metha, Dubai
PO BOX: 60081 Dubai, UAE
City of Dubai
Phone number: +971 4 3978577 Fax: +971 4 3978533
Categories: Horizontal Directional Drilling, Marine Contractors, Piling Contractors, Companies & Businesses

10. Cross Road Drilling LLC

Address: Office # 005, Mezzanine Floor, Najdad Abdulla Al Shayegi Building, Naif Road, Deira, Dubai
Landmark: Opposite Al Maktoum Hospital
PO BOX: 123767
City of Dubai
Phone number: +971 4 2243860
Categories: Horizontal Directional Drilling, Companies & Businesses

11. Cross Road Drilling LLC

Address: Plot # 59, Sector # M33, Mussaffah, Abu Dhabi
Landmark: Near Bilbadi
PO BOX: 47595
City of Abu Dhabi
Phone number: +971 2 5515615
Categories: Horizontal Directional Drilling, Companies & Businesses

12. NSCC International Limited

Address: Plot # 104 15/2, Al Karamah, Abu Dhabi
Landmark: Intersection of Karama 415th Street
PO BOX: 856 Abu Dhabi, UAE
City of Abu Dhabi
Phone number: +971 2 4957000 Fax: +971 2 4957111
Categories: Horizontal Directional Drilling, Marine Contractors, Piling Contractors, Companies & Businesses

13. NSCC International LLC

Address: Sharjah
PO BOX: 29259 Sharjah, UAE
City of Sharjah
Phone number: +971 6 5594299 Fax: +971 6 5594044
Categories: Horizontal Directional Drilling, Marine Contractors, Piling Contractors, Companies & Businesses

14. Tatco Ditch Witch

Address: Shop # 704, 7th Floor, Bin Sweed Building, Baniyas Najda Street, Al Markaziya, Abu Dhabi
Landmark: Next to Al Maha Arjaan Hotel
PO BOX: 2426 Abu Dhabi UAE
City of Abu Dhabi
Phone number: +971 2 6215511
Categories: Horizontal Directional Drilling, Companies & Businesses

Horizontal Drilling Companies Dubai Location Map

The Vertical Milling Machines consist of the milling cutter, spindle, column, over-arm or top slide, table, Y-axis slide, knee and the base. In this type of milling, the spindle of the axis is leaning vertically. The milling cutters were held to the spindle and then rotate within the axis. Spindles could be normally extended or tables are can be able to be raised or lowered, and allowing similar effect that permits the plunge to cut and drill. 2 Subcategories of the Vertical Milling:

Bed-mill – the table is allowed to move perpendicular only to the axis of the spindle, as the spindle is moving parallel in its personal axis. Another thing to remember is the lighter machine known to be the mill-drill. It is most popular to the hobbyist because of its smaller size and it is cheaper to acquire. Though, this is in lower quality compared to the other types of the machine.

Turret mills – it is usually smaller compared with the bed-mill and believed to be the more versatile type. With the turret mill, spindle will remain in a stationary mode during the cutting procedure but the table will be moving perpendicular and parallel to the axis of the spindle to be able to accomplish the cutting operation.

Horizontal Milling Machines – they are consisting of the base, knee, column, table, X-axis, over-arm and the arbor which is attached to the spindle. The horizontal milling is the same type as the x-y table thought the cutters were placed on the horizontal arbor diagonally to the table. Majority of the horizontal millings do also features the +15/-15 degrees of the rotary tables which is allowing the mills to its shallow angles.

End-mills and other types of the tools that are available to the vertical milling can also be used in horizontal mills. The real advantage is lying to the arbor-mounted cutter that is called the side and the face mills. They prefer the cross sections rather than the circular saw, and they are basically wider but smaller in diameter. Since the cutters possess fine support from arbors, heavy cuts are able to be taken.

Plain mills were utilized for shaping flat surfaces, and several cutters can be ganged all together at the arbor to be able to mill some complex shapes of those planes and slots. These special cutters will then able to cut the bevels, radii, grooves or any other section that they desire. However, these special cutters are more expensive compared to the usual mill. Simplex mill is consisting of one spindle ant the duplex millings have two. Added advantage of this horizontal milling is the easiness of cutting gears.

Best Horizontal Drilling Companies Dubai : List of the best Horizontal Drilling Companies Dubai with contact details including company names, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings. Top Horizontal Drilling Companies in Dubai UAE.

Business Directory UAE providing complete details of companies dealing in Horizontal Drilling Companies in Dubai. Find out more information on Horizontal Drilling Companies in Dubai on Yellow Pages UAE. Horizontal Drilling Companies reviews, Horizontal Drilling Companies Dubai location map, Horizontal Drilling Companies Dubai websites, Horizontal Drilling Companies Dubai directory, Horizontal Drilling Companies Dubai business directory & Horizontal Drilling Companies telephone numbers.


Horizontal Drilling Companies Dubai : List of the Horizontal Drilling Companies in Dubai with Contact Details


Horizontal Drilling Companies Dubai : List of the top Horizontal Drilling Companies in Dubai with contact details including company names, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings. Top Horizontal Drilling Companies in Dubai UAE.

User Rating: 4.94 ( 458 votes)

About Yellow Pages UAE

UAE Yellow Pages Online Directory – List of companies in UAE with contact telephone number, company address contact information, location map, company profile and email address pdf. Browse list of the top companies in the United Arab Emirates. UAE business directory where all businesses across the UAE are listed and can be searched. Find local businesses and companies in the UAE online business directory with company names, company profile, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings. Online local search & business directory for UAE providing best information on all products and services. AllUAE.ae is your tool to search for your favorite destinations ‎either for business or pleasure. AllUAE.ae is the local search engine; it collects, filters, classifies and presents local business information to the market. A smart shortcut to what you need, no matter where you are located in UAE. Companies in UAE : Top companies in UAE : List of companies in UAE with contact telephone number, company address contact information, location map, company profile and email address pdf. Browse list of the top companies in the United Arab Emirates.

2 Reviews

  1. Horizontal Drilling

    Anyone with a finger on the pulse of current events had likely heard murmurings from various parties about our dependence on finite oil supplies and other fossil fuels as well as ways we might over-come this dependency. Others have gone a different route and looked for ways that we might get more oil out of the wells that we already have, to do more with what we already have in other words.

    One of the problems is that most oil and natural gas reservoirs are more extensive horizontally then they are vertically, which means a straight vertical well will expose less surface area of the reservoir for oil to be pulled from. Normally this is not a problem since the oil in the surrounding rock will be pulled toward the well during the extraction process anyway, but wells located in a material with a low permeability matrix can prove problematic in this regard.

    These materials, such as shale, tend to limit the amount of oil that can be gleaned from a single well and may require multiple rigs and wells be drilled to get all of the oil out of the same reservoir, a costly endeavor that lacked a cost-efficient solution until recently. Horizontal drilling is when the drill-bit and string is gradually rotated as it drills so that it curves to the side as it drills into the well, eventually going full on horizontal until it reaches the desired point. This process allows oil-drillers to expose much more ‘surface area’ of the reservoir to their pumps so that they can extract more oil from a reservoir before it becomes unsustainable, especially in reservoirs with a low permeability matrix.

    This process is not new by any means, first developed in 1891 with the advent of flexible shafts to rotate drill bits but it wasn’t very feasible economically. The capability to create horizontal shafts was eclipsed by the fact that oil drillers had no way to pin-point the drill’s path underground without the use of complicated mathematics and constantly pausing the drilling to take new measurements of how far down the drill bit had gone. As you can imagine this is a time-consuming and expensive process that was rarely profitable enough to make it worthwhile until the advent of more modern scanning and imaging technology.

    These days a sensor placed behind the drill bit can provide the drillers with a constant update of the drill’s position and depth, allowing for an easier time in digging a horizontal well where it needs to be placed in order to expose as much of an oil reservoir as the well can to digging. Even still a horizontal well can be much more expensive and time consuming to dig compared to a vertical well and as such the latter is still the preferred method of drilling for oil and natural gas when both types of wells will provide equal results; considering a horizontal well can cost upwards of three hundred percent as much as a vertical well, this is typically the correct choice as well.

    So why would anyone construct a horizontal well in the first place? It all comes back to the low permeability of certain types of stone that can be found surrounding and inside of an oil reservoir which can make vertical drilling less profitable. In these situations a horizontal well will still be more expensive then a vertical one but it will also allow greater access to the reservoir itself and thus allow for more oil or natural gas to be gathered.

    Horizontal drilling in Dubai can also help to ‘vent’ pressure and dangerous build ups of gas within oil reservoirs to make it safer for diggers to work and, finally, this digging method can allow oil platforms and rigs to be spaced out over a larger distance while still tapping into the same reservoir. While it’s not right for every situation, modernized horizontal digging can allow oil companies to draw from otherwise unprofitable reservoirs and extract more oil then they otherwise could.

    As part of the drilling process, incorporating a rotating control head has been a key element. A rotating control head works as a rotating flow diverter and diverts the flow of lubricants and drill clippings from the drill site. It makes for a safer cleaner environment for the operator. The use of a rotating control head lowers drilling costs because you can achieve faster penetration rates, reduce non-drilling time, and reduce mud volume and density requirements from underbalanced drilling.

  2. UAE Yellow Pages Online Directory

    Natural gas has been the focus of attention since scientific studies have very well proved that, it is the most harmless of all the other fossil fuels, when it comes to the question of environmental friendliness. It is true, since it releases the least amount of the green house gases that promote global warming and this has made it the favorite, for the people around the globe.

    In the past, most of the gas drilling companies across the US, have been concentrating mainly only one type of drilling. This was the vertical drilling method, which was employed to drill out the natural gases that was locked below the earth, by drilling vertically through the earth. Most of the past gas wells had been dug using this method.

    But recently it was found by experts that, by employing a horizontal driller for drilling the gas wells, more amount of the natural-gas can be produced. By employing this technique today most of the natural-gas wells across the United States of America, have been very successful in drilling huge volumes of gas, from the rocks present in the earth formations. To accomplish the horizontal drilling of a gas well, the gas drilling companies use a device which is called as a mud motor. During such a process of horizontal drilling, the earth is first dug using the already practiced traditional drilling method, up to a certain depth. Once a certain level has been reached, then the company employs the horizontal drilling procedure, which gives them the choice of drilling at any angle.

    In the horizontal drilling process, along with the mud motor, a combination of fluids is also released by the drilling company, from the surface of the rig. This method enhances the efficiency and the speed at which the mud motor works and thereby, helps in the faster drilling of the natural-gas wells. This has indeed very well resulted in the spurt of the surplus production of the gas, from these natural-gas wells. Most of the natural-gas wells that are being dug around the US are being dug using the horizontal drilling technique and the vertical drilling method, has become one that is outdated.

    It demand has also made the horizontal drilling process to get much support from the government, as a way to encourage the gas drilling companies, to increase the gas production from the natural-gas wells, present in the various states of the US. Though the scope for the horizontal drilling process is very rosy in the future, there are a couple of issues, which is a real cause of concern for the public and also for the environment. It is found that the gas drilling companies, who employ the horizontal drilling process, use various types of chemicals as fluids during the drilling process, which can in turn pollute the water tables located below the earth. This is an issue that has been a cause for arguments, both for the public as well as the environmental groups, who really question the environmental friendliness of the horizontal drilling procedure.

Leave a Reply

error: Content is protected !!