Tiles Suppliers Fujairah : List of the best Tiles Suppliers in Fujairah with Contact Details including company names, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings.
Fujairah lies on the eastern side of UAE, along the Gulf of Oman and derives its name from a spring of water located beneath one of the mountains. The emirate has witnessed a rapid rate of economic and social development and tourism activities under the wise guidance of H.H. Sheikh Hamad Bin Mohammad Al Sharqi, Supreme Council member and ruler of Fujairah.
Travel in and around Fujairah and the surrounding towns of Khor Fakkan, Kalba and Masafi has been made easy by the development of modern highways since independence in 1971. Highways are funded by the federal government directly, and contracts are tendered centrally. This is meant to safeguard the quality and delivery of the contracts and prevent corruption from damaging the construction.
Fujairah has a very limited public transport, with a single bus service operating within the emirate and a service operating to Dubai. Aside from private transport, there are a number of taxis operated by the government-owned Fujairah Transport Corporation.
The Hajar mountain range that divides the UAE in two, from Ras Al Khaimah to Al Ain, separates Fujairah from the rest of the country. The historical importance of Fujairah dates back to the period before the birth of Christ. The main cities and villages are Dibba, Murbeh, Qidfa, Al Bidiyah, Masafi and Al-Siji.
The city is home to mountains, caves and archaeological sites, all of which bear testament to the rich Arab heritage.
Tiles Suppliers in Fujairah
Tiles Suppliers Fujairah : List of the tiles suppliers in Fujairah with contact details including company names, contact details, telephone numbers, email addresses, websites, location map, driving directions, deals, offers, prices, costs, coupons, vouchers, reviews and ratings. Top tiles suppliers in Fujairah UAE.
1. Al Jassim Tiles & Marble Industry
Company Name: Al Jassim Tiles & Marble Industry
Company Location & address: P.O.Box: 444, Fujairah, UAE
P.O.Box: 444, Fujairah, UAE
Company Telephone Number: +9719 2228559
Categories: Tile Suppliers
2. Emirates Ceramic Factory
Company Name: Emirates Ceramic Factory
Company Location & address: P.O.Box: 3040, Fujairah, UAE
P.O.Box: 3040, Fujairah, UAE
Company Telephone Number: +9719 2223995
Categories: Tile Suppliers
Tiles Suppliers Fujairah Location Map[su_gmap address=”Tiles Suppliers Fujairah, Fujairah, United Arab Emirates”]
Instructions Of Tiles
There are many different types of tiles which, the handyman can apply to floors, walls and ceilings. One of the oldest types is ceramic tile – these are baked clay and have been used generally in the bathroom for walls and floors. There are also plastic tiles which have been used mainly for walls and ceilings.
Ceramic tiles, however, have moved out of the bathroom into other parts of the home. Contemporary homes often have kitchen counter work tops and sometimes even living room walls made of ceramic tile. These tiles can be applied with special waterproof adhesive to any suitable smooth surface. No longer is it necessary to apply wire lath and cement to set the tiles in place.
Plastic tiles, which have gained in popularity since the end of World War II, are available in many different colors, sizes and patterns.
There are basically two types of plastic tiles. The rigid ones are made of polystyrene; the flexible tiles are usually made of vinyl. Both are applied in somewhat the same manner, although some flexible tiles come already glued. All that is necessary is to moisten the adhesive backs of these self-adhesive tiles and they can then be applied to the wall or floor.
Metal tiles of various kinds also are available. One of the most recent developments is an aluminum tile to which a ceramic coating is bonded at a temperature of from 900° to 1000° F. It can be cut easily and even bent if necessary. The tile is applied with mastic.
Ceramic tile is one of the oldest building materials known to man. Its history dates back centuries ago when it was first discovered that clay baked at high temperatures turns into a hard, durable material which is both waterproof and fireproof.
But tile is one of the most modern of materials, too. It is easy for the average handyman to install and will afford a lifetime of constant, rugged use without deterioration. Real tile – that is, tile made from baked ceramic materials – is a permanent installation. Its colors never fade. Because of its durability and the absence of any upkeep or remodeling, real tile constitutes a significant economy.
Today, ceramic tile is available to the homemaker in an amazing variety of sizes, shapes, colors, and textures. With a good waterproof adhesive, tile can be readily installed on walls, floors, and countertops.
Technically, there are two main divisions of tile: wall and floor tile. Wall tiles in popular use range from 17/4″ square to 6″x9″ rectangles. They come in either a high glaze or a matt glaze which is a somewhat softer-looking surface.
Floor tiles go from “dots” (11/32″ squares) to 9″ squares. Commonly used nominal sizes, though, are the 2″ square, the 1″ square, and the 1″x2″ rectangle. Floor tiles are generally unglazed.
Floor tiles can be broken down into three subdivisions:
• Ceramic mosaics are less than six square inches in facial surface.
• Pavers are those unglazed floor units measuring six square inches or more in facial surface.
• Quarries are made to resist especially severe conditions of weather and wear. They have a strong, dense body which can withstand extremes in temperature.
Technique of Handling Tile
Here are simple instructions for installing ceramic wall and floor tiles.
Virtually all common home surfaces which are true, level, free from moisture and foreign matter are suitable for receiving tile. In any area affected by steam or water, the base surface should be covered with two coats of primer, the second applied at right angles to the first.
All joints and apertures, such as those for bathroom fixtures, should be sealed off with a waterproof tape.
To begin tiling, install the bottom row first. Establish a level line for it. If the floor is not level, make cuts in the bottom row of tiles. If this is done, the top row of the wainscot will be level.
Simply draw a pencil line over the glazed surface parallel to the raised bars on the back of the tile, take an ordinary glass cutter and score the surface along the line. Then place the tile, glazed side up, over a nail and press on either side of the scored line. The tile will part cleanly down the line.
For special cutting, such as around fixtures, use pliers to nip off small chunks of the tile. Then smooth the surface with a Carbo-rundum stone.
Tiles in the bottom row should be “buttered’ individually with a small dab of adhesive and then pressed against the wall. Don’t put on too much adhesive; it may ooze out of the joints between tiles.
After setting the first row, spread a thin layer of adhesive over several square feet with a saw-tooth trowel. Press the tiles firmly into place with a twisting motion of the hand. Spacing bars on the edges of wall tile will keep the pieces a uniform distance apart.
Once a wall has been tiled, let it set for a day or so that the volatile elements in the adhesive can escape. Then soak the joints between tiles with a wet sponge at least four times at five-minute intervals. A gallon of water is enough for about 50 square feet of tile-work. Soaking – thorough soaking – is done so that the tiles will not draw water from the fine cement, called grout, used to fill the spaces between them.